This guide assumes you have already installed Altitude Direct using this guide

Under Systems > General, select the PMS tab.

Enable "Industry Standard" by checking the box on the left. Then save.

You may need to restart Salto Space using Space Configurator, select "Stop", and then once it has stopped, click "Start"

Open up Altitude Direct and input the Port and the local callback adaptor address (typically 127.0.0.1), click "Save" and then "Test Connection" - if successful, the version of the PMS integration will be displayed.

For the common areas that need to be assigned to guests under "PMS Authorizations", add each area and then provide Altitude Onbaording with a sheet of these including which will be defaulted on keys.